Installation Guide Linear Motors
ENG
NTI AG / LinMot
P10-70-SSC / P10-70-SSC-D02
Page 9 / 32
Slider back end (M8 thread)
Slider front end (M10 thread)
When attaching the load, the wrench for tightening the load must be used only on the load-
facing side of the slider. Avoid torsional stress on slider (note the following figures).
Incorrect mounting
Torsional stress on slider!
Correct mounting
Slider
Thread
Max. torque for screw
(Dry)
28 mm
M 8 (Slider back end)
22.5 Nm
M 10 (Slider front end)
42 Nm