manualshive.com logo in svg

LinMot C1250-PD-XC-0S, Руководство пользователя

Поделиться
Скачать
LinMot C1250-PD-XC-0S Скачать руководство пользователя страница 36

 

 

 

Page 36/38 

User Manual PROFINET PROFIdrive Interface 

NTI AG / LinMot 

5.1.4.  PROFdrive/Monitoring Channels 

 

 
With  these  parameters  the  parameters  are  defined  which  are  copied  to  the  corresponding 
monitoring channel. 
 

PROFIdrive/Monitoring Channels 

Channel 1 UPID 

Cource UPID for moniring channel 1 

Channel 2 UPID 

Cource UPID for moniring channel 2 

Channel 3 UPID 

Cource UPID for moniring channel 3 

Channel 4 UPID 

Cource UPID for moniring channel 4 

 

5.1.5.  PROFdrive/Axis Configuration/ Axis Type 

 

 
With this parameter the Axis type is defined.  

 
It has to be the same as configured on the master side! 
 

PROFIdrive/Byte Order 

Linear 

The axis is linear. 

Rotative 

The axis is rotative. 

 

5.1.6.  PROFdrive/Axis Configuration/ Linear/Rotative Reference Velocity 

 
With  PROFIdrive  telegrams  the  setpoint  values  are  transmitted  normalised,  for  this  reason 
they  have  to  be  set  into  relation  to  a  reference  value.  The  Parameter  “Linear  Reference 
Velocity” is the refrence value for the NSOLL_B and NIST_B values used the the telegrams 
3,  5 and 105 if the axis is of  type linear, if the xis is of type rotative the Reference value is 
defined with the parameter “Rotative Reference Velocity”. 
 

5.1.7.  PROFdrive/Axis Configuration/ MDI Configuration 

 
With PROFIdrive telegrams the setpoint values are transmitted normalised, in the MDI mode 
the position and velocity is mapped directly without the use of a refrence value for scaling. 
 
The transmitted position has the resolution [0.1um]. The transmitted velocity has the 
resolution [1um/s]. 
 
Onl

y for the acceleration and deceleration the reference parameter “MDI Acceleration Scale” 

is used for scaling the acceleration and deceleration of the MC-SW motion command. With 
the default value of 1’000 the transmitted acceleration values have the resolution 
[0.01m/s^3]. With a value of 100’000 they will have the resolution [1m/s^3]. 

 

 

 

Содержание C1250-PD-XC-0S







































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды