Link You and Me by Wireless
9
mechanical scratched, so be careful when handling it.
Note: If you don’t have a SIM card, contact your network
service provider.
1. Remove the power supply if it has already been connected. The
power supply must be removed whenever a SIM Card is
removed or installed.
2. Remove the SIM compartment cover by removing the screw.
3. The SIM compartment is underneath the battery, put up the
battery and open the SIM compartment holder.
4. Line up the SIM card with the arrow on the SIM card holder and
Insert the SIM card.
5. Close the SIM card holder and replace the battery.
6. Reattach the SIM compartment cover with the screw.
2.4 Turning Phone’s Power On/Off
After installing the handset correctly, turn on the power toggle switch
to “I” which located at the bottom of the phone’s housing and then
press the
key (the power key) which is on the right of the panel for
several seconds, the phone will then automatically test whether the
SIM Card is inserted and valid. Wait for the antenna icon to display
indicator bars before you make a call.
1. When the battery icon is empty, connect the external power
adapter’s barrel connector to the external power input on back
panel of unit.
2. Plug the external power adapter into the power socket. The unit
will power up automatically.
3. Check the cellular signal strength and move the unit until the
best signal possible is achieved.
Link You and Me by Wireless
10
4. In state of power-on, press and hold button
key, LCD screen
closes or turn off the power toggle switch to “0” directly.
Note: When using the phone for the first time, charge it for
over 8 hours to ensure optimum battery charge.
2.5 Appearance
Key Instructions
(1) Left
key
z
The button on the left side of the
Call key
.
z
Means
OK
or
Select
and is used to access the main
menus.
(2) M1
to
M8
keys
z
Used to store up to 8 speed dial numbers.
z
To use speed dial, lift the handset or press the
Handfree
key
then press and hold down the desired speed dial key
to call stored speed dial numbers.
(3) Clear
key
z
Let you clear your last entry.
(4) Set
key
z
It is the shortcut key to access
Audio
Settings menu
