Link You and Me by Wireless
33
very useful especially when making international calls as you can
easily monitor the length of the conversation and end a call before
a minute is reached.
5.5.5.2 Call Waiting
Allow an incoming call to wait to be answered while you are
engaged in an earlier call.
Note: Call Divert, Call Waiting and Firewall require network
support.
5.5.5.3 IP Setting
Select
IP Enable
to be “
On
” or “
Off
” to activate or deactivate IP
function, and key in
IP Code
, e.g. access IP Number 17951, and
then press
Left key
to confirm.
After setting of IP Code, the phone can add the access IP Number
automatically before the phone number selected from
Names
or
Calls
to send a call.
5.5.6 Network Settings
Allow you to automatically or manually select the network to use.
5.5.7 Select Mode
There are two options for band selection.
z
G
/D
z
GSM850/PCS
5.5.8 Security Settings
Introduction to phone’s security options preventing others to avoid
illegal use or acquire your phone’s personal information.
The default lock code is “1234”. Press the code “1234” to enter
Link You and Me by Wireless
34
into submenu.
•
SIM password:
Select “
On
” or “
Off
” to activate PIN
Code or not. Or enter new PIN Code by your own to
change the old PIN Code.
z
Phone Lock:
Select “
On
” or “
Off
” to activate phone lock
or not. Or enter new Phone Lock Code by your own to
Change Code.
z
Network Call Bar:
Set any of call bar(s) in the following
to promote security, please contact to the service
provider for details. The service provider will offer you a
4-digit Network Code to activate Network Call Bar.
Press
Select
to enter in:
¾
International Calls
:
Bar international call(s).
¾
All Except Home:
Bar all calls except for home number.
¾
Incoming Calls
:
Bar incoming call(s).
¾
Incoming If Abroad:
Bar incoming call(s) overseas.
¾
Outgoing Calls:
Bar sending call(s).
Select any of above mentioned bar(s), and then scroll to set
barring options:
- All Services:
Bar all services, such as incoming call, voice
call, and message, etc.
- Voice Calls:
Bar voice call only.
- Data:
Bar data only.
- Fax:
Bar fax only.
- Message:
Bar message only.
- All except Msgs:
Bar all services except for message.
After setting bar and service type, you can do as follows:
- On:
Activate bar after registration.
