background image

1

Chapter 1: Introduction
Welcome

Wireless-G Router for Mobile Broadband

Chapter 1: Introduction

Welcome

Thank you for choosing the Linksys Wireless-G Router for Mobile Broadband The Wireless-G Router for 
Mobile Broadband will allow you to network wirelessly better than ever, sharing Internet access, files and fun, 
easily and securely.

How does the Wireless-G Router for Mobile Broadband do all of this? A router is a device that allows access to an 
Internet connection over a network. With the Wireless-G Router for Mobile Broadband, you can access the 
Internet through either your mobile broadband service (requires a mobile broadband data card, available 
separately), or you can use a cable or DSL modem for broadband service. Plus, this access can be shared over 
the four switched ports or via the wireless broadcast at up to 54Mbps for Wireless-G or up to 11Mbps for 
Wireless-B.

Use the WPA or WPA2 standard to secure your wireless network while the whole network is protected through a 
Stateful Packet Inspection (SPI) firewall and Network Address Translation (NAT) technology. Run the Setup Wizard 
and it will guide you through the steps. You can also access the Router’s features through the easy-to-use, 
browser-based utility.

But what does all of this mean?

Networks are useful tools for sharing computer resources. You can access one printer from different computers 
and access data located on another computer's hard drive. Networks are even used for playing multiplayer video 
games. So, networks are not only useful in homes and offices, they can also be fun.

PCs on a wired network create a LAN, or Local Area Network. They are connected with Ethernet cables, which is 
why the network is called “wired”. 

PCs equipped with wireless cards or adapters can communicate without cumbersome cables. By sharing the 
same wireless settings, within their transmission radius, they form a wireless network. This is sometimes called 
a WLAN, or Wireless Local Area Network. The Wireless-G Router for Mobile Broadband bridges wireless networks 
of both 802.11b and 802.11g standards and wired networks, allowing them to communicate with each other.

With your networks all connected, wired, wireless, and the Internet, you can now share files and Internet 
access—and even play games. All the while, the Wireless-G Router for Mobile Broadband protects your networks 
from unauthorized and unwelcome users.

lan

 (local area network): The computers and 

networking products that make up the network in 
your home or office.

nat

 (network address translation): NAT technology 

translates IP addresses of a local area network to a 
different IP address for the Internet. 

wpa 

(wi-fi protected access): a wireless security 

protocol using TKIP (Temporal Key Integrity Protocol) 
encryption, which can be used in conjunction with a 
RADIUS server.

spi

 (stateful packet inspection) 

firewall

: a technology 

that inspects incoming packets of information before 
allowing them to enter the network.

firewall

: Security measures that protect the 

resources of a local network from intruders.

wpa2 

(wi-fi protected access2: a wireless security protocol 

using TKIP (Temporal Key Integrity Protocol) encryption and 
AES 

(Advanced Encryption System)

 with dynamic encryption 

keys, which can be used in conjunction with a RADIUS server.

Содержание WRT54G3G-ST





































































































































Отзывы: