10
Chapitre 5 : Configuration du point d’accès sans fil - G
Utilisation de l’Assistant de configuration
Point d’accès sans fil - G
3. Idéalement, vous devriez configurer le point d’accès à l’aide d’un ordinateur de votre réseau câblé. Connectez
un câble réseau à votre commutateur ou routeur réseau. Puis cliquez sur le bouton
Next
(Suivant).
4. L’écran indique comment le point d’accès devrait être connecté lorsque vous exécutez l’Assistant de
configuration. Connectez l’autre extrémité du câble réseau au port réseau Ethernet du point d’accès. Puis
cliquez sur le bouton
Next
(Suivant).
Figure 5-2 : Ecran de connexion du câble réseau au
routeur ou au commutateur
Figure 5-3 : Ecran de connexion du câble réseau au
point d’accès