![background image](http://html.mh-extra.com/html/linksys/wap54g-wireless-g-access-point/wap54g-wireless-g-access-point_quick-installation-manual_1925250098.webp)
28
Chapter 6: Configuring the Wireless-G Access Point
The Setup - AP Mode Tab
Wireless-G Access Point
Wireless Bridge
. This mode connects two physically separated wired networks using two access points (use
additional access points to connect more wired networks). This feature only works with another Wireless-G
Access Point (model number: WAP54G).
To configure a Wireless Bridge environment, select
Wireless Bridge
, and enter the MAC addresses of the
wireless bridges/access points in the
Remote Wireless Bridge’s LAN MAC Addresses
fields. You will also need to
set the remote wireless bridges/access points to Wireless Bridge mode.
Change these settings as described here and click
Save Settings
to apply your changes, or click
Cancel
Changes
to cancel your changes. Click
Help
for more information.
IMPORTANT:
In Wireless Bridge mode, the Access
Point can ONLY be accessed by another access point
in Wireless Bridge mode. In order for your other
wireless devices to access the Access Point, you
must reset it to Access Point mode. The two modes
are mutually exclusive.
Figure 6-7: Wireless Bridge Diagram