18
Chapter 4: Using the Console Interface for Configuration
Configuring the Switch through the Console Interface
WebView Switches
Management Settings
From the Management Settings screen, you can set Serial Port Session Configuration, Telnet Session
Configuration, or Secure Telnet (SSH) Configuration.
Serial Port Configuration
On the
Serial Port Configuration
screen, the Switch’s baud rate is displayed.
Select
Edit
and press the
Enter
key to make changes. Toggle to the desired speed and when your changes are
complete, press the
Esc
key to return to the
Action
menu. Select
Save
and press the
Enter
key to save your
changes. To exit, select
Quit
and press the
Enter
key.
Telnet Configuration
On the
Telnet Configuration
screen, the time-out is displayed. The value is entered in seconds. If you do not want
the Telnet session to timeout, you may enter a value of 0 sec.
Select
Edit
and press the
Enter
key to make changes. When your changes are complete, press the
Esc
key to
return to the
Action
menu. Select
Save
and press the
Enter
key to save your changes. To exit, select
Quit
and
press the
Enter
key.
Figure 4-13: Telnet Configuration
Figure 4-11: Management Settings Menu
Figure 4-12: Serial Port Configuration
Содержание SRW2008
