Linksys SRW2008 Скачать руководство пользователя страница 86

Страница: 86 / 130

Chapter 5: Using the Web-based Utility for Configuration
SNMP Tab - Group Profile

WebView Switches

SNMP Tab - Group Profile

The Group Profile screen provides information for creating SNMP groups and assigning SNMP access control
privileges to SNMP groups. Groups allow network managers to assign access rights to specific device features,
or features aspects.

Group Name.

Displays the user-defined group to which access control rules are applied. The field range is up to

30 characters.

Security Model.

Defines the SNMP version attached to the group. The possible field values are:

•

SNMPv1.

SNMPv1 is defined for the group.

•

SNMPv2.

SNMPv2 is defined for the group.

•

SNMPv3.

SNMPv3 is defined for the group.

Security Level.

Defines the security level attached to the group. Security levels apply to SNMPv3 only. The

possible field values are:

•

No Authentication.

Indicates that neither the Authentication nor the Privacy security levels are assigned

to the group.

•

Authentication.

Authenticates SNMP messages, and ensures the SNMP messages origin is

authenticated.

•

Privacy.

Encrypts SNMP messages.

Operation.

Defines the group access rights. The possible field values are:

•

Read.

The management access is restricted to read-only, and changes cannot be made to the assigned

SNMP view.

•

Write.

The management access is read-write and changes can be made to the assigned SNMP view.

•

Notify.

Sends traps for the assigned SNMP view.

Figure 5-58: SNMP - Group Profile

Содержание SRW2008



































































































































Результаты поиска

Содержание SRW2008

Отзывы:

Похожие инструкции для SRW2008

Бренды по названию

Популярные бренды

Linksys SRW2008, Руководство пользователя

Результаты поиска

Содержание SRW2008

Отзывы:

Похожие инструкции для SRW2008

Бренды по названию

Популярные бренды