Linksys SRW2008 Скачать руководство пользователя страница 91

Страница: 91 / 130

Chapter 5: Using the Web-based Utility for Configuration
Admin Tab - User Authentication

WebView Switches

•

Authentication.

Indicates the packet is authenticated.

•

Privacy.

Indicates the packet is both authenticated and encrypted.

UDP Port.

Displays the UDP port used to send notifications. The default is 162.

Filter Name.

Indicates if the SNMP filter for which the SNMP Notification filter is defined.

Timeout.

Indicates the amount of time (seconds) the device waits before resending informs. The default is 15

seconds.

Retries.

Indicates the amount of times the device resends an inform request. The default is 3 seconds.

The

Add to List

button adds the Notification Recipient configuration to the relevant table at the bottom of the

screen.

Admin Tab - User Authentication

The User Authentication screen is used to modify user passwords.

Authentication Type.

Defines the user authentication methods. Combinations of all the authentication methods

can be selected. The possible field values are:

•

Local.

Authenticates the user at the device level. The device checks the user name and password for

authentication.

•

RADIUS.

Authenticates the user at the RADIUS server.

•

Authenticates the user at the server.

•

None.

Assigns no authentication method to the authentication profile.

User Name.

Displays the user name.

Password.

Specifies the new password. The password is not displayed. As it entered an “*” corresponding to

each character is displayed in the field. (Range: 1-159 characters)

Confirm Password.

Confirms the new password. The password entered into this field must be exactly the same

as the password entered in the Password field.

The

Add to List

button adds the user configuration to the Local User’s Table.

Figure 5-63: Admin - User Authentication

Содержание SRW2008



































































































































Результаты поиска

Содержание SRW2008

Отзывы:

Похожие инструкции для SRW2008

Бренды по названию

Популярные бренды

Linksys SRW2008, Руководство пользователя

Результаты поиска

Содержание SRW2008

Отзывы:

Похожие инструкции для SRW2008

Бренды по названию

Популярные бренды