![background image](http://html1.mh-extra.com/html/linksys/sfe2010/sfe2010_admin-manual_1924703054.webp)
SFE2010/SFE2010P Administration Guide
51
System Mode (Layer 2 / Layer 3) Selection
Using the Console
To configure the PoE settings:
1. Select
Edit
.
2. Proceed as needed:
a. Press the
down
arrow key to scroll down through the list of ports.
b. Press the
right arrow
key to move the cursor from one field to the next within a row.
c. To change a setting, move the cursor to the field, and then press the
Space Bar
until the
desired setting appears.
3. Press the
Esc
key to move the cursor to the
Action
list.
4. Select
Save
to save your settings
5. When the
Operation complete
message appears, press the
Esc
key to move the cursor to the
Action
list.
System Mode (Layer 2 / Layer 3) Selection
You can use the
System Mode Selection
screen to specify whether the Ethernet switch is
operating in Layer 2 or Layer 3 mode. You can also configure stacking mode from this screen.
To open this screen:
From the
Switch Main Menu
, press
4. System Mode
.
Field
Settings
Priority
Low, High, or Critical
Enable
Enable or Disable