![background image](http://html.mh-extra.com/html/linksys/lne100m/lne100m_user-manual_1923844031.webp)
Driver Initial Delay
Enabling the
Driver Initial
Delay option,
shown in Figure
11-9, will increase
the speed of pack-
et transmission.
Flow Control
This allows for more efficient transfer of data and should only be selected when
connected to networking devices that support flow control. The third option
provided, Hardware Default (shown in Figure 11-10), allows the Adapter to
automatically detect if it is connected to such a networking device.
Instant EtherFast
®
Series
802.1p/Q Tagging
Shown in Figure 11-7, enabling this feature allows for quality of service pack-
et tagging when connected to a network switch that supports quality of service.
Therefore, this feature should only be enabled when connecting to such a
switch. If connect-
ing to a switch that
does not support
quality of service,
disable this fea-
ture.
Connection Type
Shown in Figure 11-8, this allows you to choose the speed at which your net-
work is running. If connecting to an auto-sensing network, where data is trans-
mitted at different speeds, select Auto-Negotiation.
Figure 11-9
Figure 11-10
54
EtherFast
®
10/100 Managed Network Adapter
Figure 11-7
Figure 11-8
53