![background image](http://html.mh-extra.com/html/linksys/lapac2600/lapac2600_user-manual_1925219032.webp)
SSID Settings
SSID Name
Enter the desired SSID Name. Each SSID must have a
unique name. The name includes 1 to 32 characters.
Broadcast
Enable or disable the broadcast of the SSID.
When the access point does not broadcast its SSID, the
network name is not shown in the list of available networks
on a client station. Instead, you must enter the exact
network name manually into the wireless connection utility
on the client so that it can connect.
Isolation
Enable or disable isolation among clients of the SSID. If
enabled, wireless clients cannot communicate with others
in the same SSID.
It is disabled by default.
802.11k
Enable or disable 802.11k of the SSID.
The 802.11k protocol provides mechanisms for APs and
clients to measure the available radio resources
dynamically. In an 802.11k enabled network, APs and
clients can send neighbor reports, beacon reports, and link
measurement reports to each other. This allows the APs
and clients to take appropriate connection actions for next
hop if client has weak connection to current AP.
VLAN ID
Enter the VLAN ID of the SSID.
Used to tag packets which are received from the wireless
clients of the SSID and sent from Ethernet or WDS
interfaces.
Applicable only when VLAN function is enabled. VLAN
function can be configured in Configuration -> LAN ->
Network Setup screen.
Max Clients
Enter the number of clients that can connect to the SSID.
The range is from 0 to 32 and 0 means no limit.
32
Содержание LAPAC2600
