![background image](http://html1.mh-extra.com/html/linksys/etherfast-ef1704/etherfast-ef1704_user-manual_1925066007.webp)
EtherFast
®
Layer 3 Management 4-Port Gigabit Ethernet Switch
8
Instant EtherFast
®
Series
2. The following screen will appear. Enter a Name for this connection. In the
example shown in Figure 4-2, the name of the connection is EF1704. Click
the OK button.
3. The screen shown in
Figure 4-3 will appear.
In the bottom drop down
box labeled Connect
using:, click the arrow
and choose the COM
port that the Switch will
be connected to. In the
example below, COM1
is the port selected.
Click the OK button.
7
4. When the screen shown in Figure 4-4 appears, make sure that the port set-
tings are as follows:
BAUD RATE:
19200
DATA BITS:
8
PARITY:
None
STOP BITS:
1
FLOW CONTROL:
None
Click the OK button.
Web Management
The IP address is already configured on the Switch by default. Use a standard
Web browser (Internet Explorer 4.0 or above, or Netscape Navigator 4.0 or
above is suggested) from any computer attached to the network. The Switch has
a default IP address of 192.168.1.254 and a default subnet address of
255.255.255.0.
Figure 4-2
Figure 4-4
Figure 4-3