![background image](http://html1.mh-extra.com/html/linksys/etherfast-ef1704/etherfast-ef1704_user-manual_1925066047.webp)
EtherFast
®
Layer 3 Management 4-Port Gigabit Ethernet Switch
IP Menu
The IP Menu, shown in Figure 6-78, displays information regarding a variety
of IP settings, including subnets, ARP table, routing table, and multicast
groups. (Only available in multilayer mode).
• Subnet Information - Displays settings for the IP interface of VLANs.
• ARP Table - Shows the IP-to-MAC addresses discovered by ARP.
• Routing Table - Shows the routes through which all recognized Ethernet net-
works (and the corresponding VLAN) can be reached.
• Multicast Table - Displays all the multicast groups active on this Switch,
including the multicast IP address and the corresponding VLANs.
• OSPF Table - Displays the OSPF routing information.
Select OK to return to the previous panel.
88
Figure 6-78
Instant EtherFast
®
Series
VLAN Forwarding Information
The VLAN Forwarding Information screen, shown in Figure 6-77, shows all
the ports that have been configured by either dynamic or static means to for-
ward VLAN traffic.
• VLAN - The ID for the VLAN.
• Port - The ports on the Switch. Read the numbers vertically; they range
from 1-26. For each port number, there are two choices:
If the letter “D” is present, it indicates that the port has been con-
figured by dynamic means.
If the letter “S” is present, it indicates that the port has been con-
figured by static means.
Select Apply to make changes. Select OK to return to the previous panel.
Select Prev Page to view the previous page. Select Next Page to view the next
page. To display a specific page, set the page number in the Page field and then
press Apply.
87
Figure 6-77