![background image](http://html1.mh-extra.com/html/linksys/etherfast-ef1704/etherfast-ef1704_user-manual_1925066020.webp)
EtherFast
®
Layer 3 Management 4-Port Gigabit Ethernet Switch
Add Static Address Entry
The Add Static Address Entry screen, shown in Figure 6-24, allows you to
add static addresses for unicasting.
•
Address - The MAC address of a host device attached to this Switch.
•
Port - The switch port the host device is attached to.
Select OK to confirm the changes. Select Cancel to cancel any changes.
34
Instant EtherFast
®
Series
Static Unicast Address Configuration
The Static Unicast Address Table, shown in Figure 6-23, can be used to
assign the MAC address for a host device to a specific port on this Switch.
Static unicast addresses are never aged out, and cannot be learned on anoth-
er port.
• Address - The MAC address of a host device attached to this Switch.
• VLAN - Shows when connected to a VLAN on this address.
• Port - The switch port the host device is attached to.
To assign a destination MAC address to one or more ports, use Add. To delete
or modify an address, highlight it with the cursor and press Enter. Select
Apply to make changes. Select OK to return to the previous panel. Select Prev
Page to view the previous page. Select Next Page to view the next page. To dis-
play a specific page, set the page number in the Page field and then press
Apply.
33
Figure 6-23
Figure 6-24