manualshive.com logo in svg

Linksys EG0801SK - EtherFast Network Starter, Руководство пользователя, Страница: 31 / 44

Поделиться
Скачать
Linksys EG0801SK - EtherFast Network Starter Скачать руководство пользователя страница 31

1. Click 

the 

Start button, choose Settings, choose Control Panel, then double-

click the System icon.The System Properties window will open.

2.  Choose the Hardware tab.

3.  Click the Device Manager button. The Device Manager window will open.

4.  Click the plus sign (+) beside Network Adapters. The EG1032 or EG1064

Instant Gigabit Network Adapter listing should appear.

Starting Over in Windows 2000

8.  Scroll down to the Network Adapters listing and expand it by clicking on

the plus [+] sign.

9.  Remove all devices with the name Linksys in its  description. (If at any

point you are asked to restart the computer, Click No).

10. Scroll down to the Other Devices listing. Click the plus [+] sign. Remove

PCI Ethernet Controller or PCI Ethernet Adapter. (If Other Devices is not
listed, proceed to the next step.) 

11. Click the Close button, shut down Windows, and restart your computer.

12. After your computer has restarted, follow the setup instructions for

Windows 95, 98, or Millennium.

EtherFast

® 

10/100/1000 8+1 Workgroup GigaSwitch Starter Kit

Instant Gigabit Series

56

55

Содержание EG0801SK - EtherFast Network Starter













































Отзывы:

Нет отзывов