![background image](http://html.mh-extra.com/html/linksys/eg0801sk-etherfast-network-starter/eg0801sk-etherfast-network-starter_user-manual_1924611011.webp)
3. If you clicked the Other Locations button, this window will appear. Enter
a:\win95. Windows will begin copying the Network Adapter’s driver files
to your PC.
4. Once Windows has located the drivers, the following window will appear.
To use this driver, click the Finish button.
At this point, the installation may require files from your Windows 95 CD-
ROM. If prompted, insert your Windows 95 CD-ROM into your CD-ROM
drive and enter d:\win95 in the box that appears (where “d” is the letter of
your CD-ROM drive). If you were not supplied with a Windows 95 CD-
ROM, your Windows files may have been placed on your hard drive by
your computer manufacturer. While the location of these files may vary ,
many manufacturers use c:\windows\options\cabs as the path. Try enter-
ing this path into the box. If no files are found, check your computer’s doc-
umentation or contact your computer manufacturer for more information.
1. While the Update Device Driver Wizard window is visible, insert the Instant
Gigabit Network Adapter Driver Disk into your floppy drive and click the
Next button.
2. Windows 95 will find the Linksys EG1032/EG1064 Instant Gigabit Network
Adapter driver on the disk. Click the Finish button to continue. If Windows
fails to find the driver, click the Other Locations button to browse for the
driver.
Installing the Driver in Windows 95 Version B
Instant Gigabit Series
EtherFast
®
10/100/1000 8+1 Workgroup GigaSwitch Starter Kit
16
15