![background image](http://html.mh-extra.com/html/linksys/e1000/e1000_user-manual_1924574007.webp)
Linksys E1000
Chapter 2: Cisco Connect
4
Wireless-N Router
b . Plug the power adapter into an electrical outlet .
Connect to Electrical Outlet
c . Unplug the existing Ethernet cable from your
computer and plug it into the yellow port labeled
Internet on the back of the Router . Click Next .
Internet
Ethernet
4
3
2
1
Reset
Power
12VDC
Connect Ethernet Cable
NOTE:
You can view detailed connection steps
by clicking
in the setup software .
NOTE:
If the setup software detects multiple
routers, then select the serial number of your
Router . The serial number is located on the
left side of the product label, which is on the
bottom of the Router .
5 . Please wait while the setup software is setting up the
Router .
Please Wait
6 . The installation is complete . Click OK .
Installation is Complete
NOTE:
If you have any problems during the
installation process, refer to the Frequently
Asked Questions in the setup software, or use a
computer with an active Internet connection to
visit www.linksys.com/support .
Main Menu
When Cisco Connect starts up, the main menu appears:
Main Menu
Status information is displayed in the upper right corner:
•
online secure
Your local network is secure, and your Internet
connection is available .
•
offline secure
Your local network is secure; however, your Internet
connection is not available . To repair your Internet
connection, follow the on-screen instructions .
NOTE:
A group of computers or other devices
connected to a router is a local network .
The router allows the networked devices to
communicate with each other .