background image

20

Wireless-N Router

Linksys E1000

Chapter 3: Advanced Configuration

Manual Setup

If  you  set  the 

Configuration  View 

to  Manual,  the 

Basic 

Wireless Settings

 screen displays the following fields .

Wireless > Basic Wireless Settings (Manual Setup)

Network  Mode 

From  this  drop-down  menu,  you  can 

select the wireless standards running on your network . 

 

Mixed 

If  you  have  Wireless-N,  Wireless-G,  and 

Wireless-B devices in your network, keep the default, 
Mixed .

 

BG-Mixed 

If you have only Wireless-G and Wireless-B 

devices in your network, select BG-Mixed . 

 

Wireless-N Only 

If you have only Wireless-N devices, 

select Wireless-N Only . 

 

Wireless-G Only 

If you have only Wireless-G devices, 

select Wireless-G Only . 

 

Wireless-B Only 

If you have only Wireless-B devices, 

select Wireless-B Only . 

 

Disabled 

If  you  do  not  have  any  wireless  devices  in 

your network, select Disabled .

NOTE:

 If you are not sure which mode to use, 

keep the default, Mixed .

Network  Name  (SSID) 

The  Service  Set  Identifier  (SSID) 

is  the  network  name  shared  by  all  devices  in  a  wireless 
network .  It  is  case-sensitive  and  must  not  exceed 
32 keyboard characters . The default is Ciscoxxxxx (xxxxx 
are the last five digits of the Router’s serial number) . The 
serial  number  is  located  on  the  left  side  of  the  product 
label, which is on the bottom panel .

Channel  Width 

The  default  is  20  MHz  Only .  For  best 

performance, select Auto to have the Router automatically 
select the Channel Width (20 MHz or 40 MHz) .

Channel 

Select the appropriate channel for your wireless 

network . If you are not sure which channel to select, then 
keep the default, Auto .

SSID  Broadcast 

When  wireless  clients  survey  the  local 

area  for  wireless  networks  to  associate  with,  they  will 
detect the SSID broadcast by the Router . To broadcast the 

Router’s  SSID,  keep  the  default,  Enabled .  If  you  do  not 
want to broadcast the Router’s SSID, then select Disabled .

Click Save Settings to apply your changes, or click Cancel 
Changes
 to clear your changes .

Wi-Fi Protected Setup

There are three methods available . Use the method that 
applies to the client device you are configuring .

Wireless > Basic Wireless Settings (Wi-Fi Protected Setup)

NOTE:

  Wi-Fi  Protected  Setup  configures  one 

client device at a time . Repeat the instructions 
for  each  client  device  that  supports  Wi-Fi 
Protected Setup .

 

Wi-Fi  Protected  Setup  Button 

Use  this  method  if 

your client device has a Wi-Fi Protected Setup button .

a .  Click or press the Wi-Fi Protected Setup button on 

the client device .

b .  Click  the  Wi-Fi  Protected  Setup  button  on  the 

Router’s 

Wi-Fi Protected Setup

 screen .

The Wi-Fi Protected Setup LED flashes blue for two 
minutes during the Wi-Fi Protected Setup process 
and lights up blue when the Wi-Fi Protected Setup 
process is successful .

The LED lights up amber if there is an error during 
the Wi-Fi Protected Setup process . Make sure the 
client device supports Wi-Fi Protected Setup . Wait 
until the LED is off, and then try again . 

The  LED  flashes  when  a  Wi-Fi  Protected  Setup 
session is active . The Router supports one session 
at a time . Wait until the LED is continuously lit, or 
off before starting the next Wi-Fi Protected Setup 
session .

c .  After  the  client  device  has  been  configured, 

click  OK  on  the  Router’s 

Wi-Fi  Protected  Setup

 

screen . Then refer back to your client device or its 
documentation for further instructions .

Содержание E1000





























































Отзывы: