![background image](http://html.mh-extra.com/html/linksys/befsx41-instant-broadband-etherfast-cable-dsl-firewall-router/befsx41-instant-broadband-etherfast-cable-dsl-firewall-router_user-manual_1924561057.webp)
50
Appendix A: Troubleshooting
Common Problems and Solutions
Broadband Firewall Router with 4-Port Switch/VPN Endpoint
9. I forgot my password, or the password prompt always appears when saving settings to the Router.
Reset the Router to factory default by pressing the
Reset
button for 30 seconds and then releasing it. If you
are still getting prompted for a password when saving settings, then perform the following steps:
A. Access the Router’s web interface by going to
http://192.168.1.1
or the IP address of the Router. Enter
the default password admin, and click the
Administration
=>
Management
tab.
B. Enter a different password in the
Router Password
field, and enter the same password in the second field
to confirm the password.
Click the
Save Settings
button.
10. I am a PPPoE user, and I need to remove the proxy settings or the dial-up pop-up window.
If you have proxy settings, you need to disable these on your computer. Because the Router is the gateway for
the Internet connection, the computer does not need any proxy settings to gain access. Please follow these
directions to verify that you do not have any proxy settings and that the browser you use is set to connect
directly to the network.
For Microsoft Internet Explorer 5.0 or higher:
A. Click
Start
,
Settings
, and
Control Panel
. Double-click
Internet Options
.
B. Click the
Connections
tab.
C. Click the
LAN settings
button and remove anything that is checked.
D. Click the
OK
button to go back to the previous screen.
E. Click the option
Never dial a connection
. This will remove any dial-up pop-ups for PPPoE users.
For Netscape 4.7 or higher:
A. Start
Netscape Navigator
, and click
Edit
,
Preferences
,
Advanced
, and
Proxies
.
B. Make sure you have
Direct connection to the Internet
selected on this screen.
Close all the windows to finish.
11. To start over, I need to set the Router to factory default.
Hold the Reset button for up to 30 seconds and then release it. This will return the password, forwarding, and
other settings on the Router to the factory default settings. In other words, the Router will revert to its original
factory configuration.