![background image](http://html1.mh-extra.com/html/linksys/ag310/ag310_user-manual_1923796030.webp)
24
Chapter 6: Configuring the ADSL2+ Gateway
The Setup - Advanced Routing Tab
ADSL2+ Gateway with VoIP
Destination IP Address
. The Destination IP Address is the address of the remote network or host to which you
want to assign a static route. Enter the IP address of the host for which you wish to create a static route. If you are
building a route to an entire network, be sure that the network portion of the IP address is set to 0.
Subnet Mask
. Enter the Subnet Mask (also known as the Network Mask), which determines which portion of an
IP address is the network portion, and which portion is the host portion.
Gateway
. Enter the IP address of the gateway device that allows for contact between the Gateway and the
remote network or host.
Hop Count
. Hop Count is the number of hops to each node until the destination is reached (16 hops maximum).
Enter the Hop Count in the field provided.
Click the
Show Routing Table
button to open a screen displaying how data is routed through your local network.
For each route, the Destination LAN IP address, Subnet Mask, Gateway, and Interface are displayed. Click the
Refresh
button to update the information. Click the
Close
button to return to the previous screen.
PVC Routing Policy
If you have multiple PVCs, click the
PVC Routing Setting
button to configure which outgoing traffic will be routed
over which PVC. A window titled PVC Selection Table will appear.
Please select Active Connection
. Open this drop-down list and specify the PVC for which you will select traffic.
Traffic can be selected on the basis of any of the following criteria, alone or in combination:
•
Destination (IP address, netmask, and FQDN)
•
Source (IP address and netmask)
•
Source MAC (MAC address)
•
Destination MAC (MAC address)
•
Transport protocol (TCP, UDP, or All)
•
Dst Port/Scr Port (Destination port and/or source port). If protocol is set to TCP or UDP.
•
ALG. Triggering of a particular Application Layer Gateway (FTP, TFTP, H.323, IRC, MMS, GRE, PPTP, SIP, or
RTSP)
•
Presence of a specified IEEE 802.1D user priority marker
Figure 6-15: Routing Table
Figure 6-16: PVC Routing
Содержание AG310
