Q uick R eference S heet
A pplicable M odels: LDV -D M 02E S K /LDV-D M 04ESK
Q uick R eference S heet
QUICK REFERNCE SHEET for Dual Monitor DVI KVM Switch Operation Commands
Hotkeys/ Front-Panel Button
Command
Hotkeys
Front-panel Button
Description
ScrLk + ScrLk + (x)
1
Select P C
(x is a top-row number key)
x = 1 ~ 2 or x = 1 ~ 4 for PC channel no.
--
Select the active channel
N ext low er channel
ScrLk + ScrLk +
↑
(arrow up)
--
Select the next lower connected channel
N ext higher channel
ScrLk + ScrLk +
↓
(arrow down)
Press the push button to switch to the
next channel
Select the next higher connected channel
A utoscan B eep S ound
O n/O ff
ScrLk + ScrLk + B
--
Toggle on/off the beep sound for switching
confirmation while autoscanning
R eset C onsole M o use
ScrLk + ScrLk
+
End
--
Reset mouse on the console side
A utoscan
ScrLk + ScrLk + S
--
Autoscan through every connected channel for
quick screen browsing of each channel
Stop A utoscan
Any key on keyboard
--
Terminate Autoscan activity
Notes:
1 Note that (
x)
denotes a number key for the selected port number (from 1 ~ 4). Use only the number keys on the upper row of the keyboard.
Important Note
: Digital display resolution is up to 1600 x 1200 pixels
Hotkey convention:
The hotkey notation
ScrLk + ScrLk + (key)
, denotes that you should hit the individual key consecutively one at a time, not simultaneously.
Rev. 1.0
Copyright© All rights reserved. June 2004
Technical Support
E-mail:
Website: www.linkskey.com
