manualshive.com logo in svg

linkPro WLB-230BXLE, Руководство пользователя, Страница: 30 / 49

Поделиться
Скачать
linkPro WLB-230BXLE Скачать руководство пользователя страница 30

 

the 

Timeout

 and 

Max no. of retries

 settings of TFTP Server for remote TFTP upgrade to succeed. 

3.3.3.4. Backing up and Restoring Configuration Settings by TFTP 

 

Fig. 37. Configuration backup/restore. 

To back up configuration of the DRBAP by TFTP: 

1.  Get a computer that will be used as a TFTP server and as a managing computer to trigger the 

backup process.   

2. 

Connect the computer and one of the LAN Ethernet switch port with a normal Ethernet cable. 

3. 

Configure the IP address of the computer so that the computer and the DRBAP are in the same 
IP subnet. 

4. 

On the computer, run the TFTP Server utility. Select the 

Accept write requests

 check box, and 

specify the folder to which the configuration settings of the DRBAP will be saved. 

5. 

On the computer, run a Web browser and click the 

General, Firmware

 

Tools 

hyperlink.  

6. Choose 

TFTP

 as the 

Firmware management protocol

. 

7. Within 

the 

Configuration Backup/Restore

 section, specify the IP address of the computer, 

which acts as a TFTP server. If you don’t know the IP address of the computer, open a Com-
mand Prompt, and type IpConfig, then press the 

Enter 

key. 

8.  Trigger the backup process by clicking 

Back Up

. The DRBAP’s configuration settings will be 

saved as “

AaBbCcDdEeFf.hex

” by the TFTP server, where “AaBbCcDdEeFf” is the DRBAP’s 

MAC address. For example, if the DRBAP’s MAC address is 00-01-02-33-44-55, the configura-
tion backup file will be “000102334455.hex”. 

NOTE: 

Remember to select the 

Accept write requests

 check box of TFTP Server. 

To restore configuration of the DRBAP by TFTP: 

1.  Get a computer that will be used as a TFTP server and as a managing computer to trigger the 

restoring process.   

2. 

Connect the computer and one of the LAN Ethernet switch port with a normal Ethernet cable. 

3. 

Configure the IP address of the computer so that the computer and the DRBAP are in the same 
IP subnet.   

4. 

On the computer, run the TFTP Server utility. And specify the folder in which the configuration 
backup file resides. A configuration backup file is named by the DRBAP’s MAC address. For 
example, if the DRBAP’s MAC address is 00-01-02-33-44-55, the configuration backup file 
should be “000102334455.hex”. 

5. 

On the computer, run a Web browser and click the 

General, Firmware

 

Tools 

hyperlink.  

 

25

Содержание WLB-230BXLE


















































Отзывы:

Нет отзывов