linkPro WLB-230BXLE Скачать руководство пользователя страница 22

Страница: 22 / 49

Password.

For gaining rights to change the settings of the DRBAP.

Firmware Tools.

For upgrading the firmware of the DRBAP, backing up and restoring

configuration, and configuration reset settings of the DRBAP.

TCP/IP.

TCP/IP-related settings.

Addressing.

IP address settings for the DRBAP to work with TCP/IP.

DHCP Server.

Settings for the DHCP (Dynamic Host Configuration Protocol) server on

the DRBAP.

IEEE 802.11.

IEEE 802.11g-related settings.

Communications.

Basic settings for the IEEE 802.11g interfaces of the DRBAP.

Security.

Security settings for authenticating wireless users and encrypting wireless data

for an AP interface. And security settings for encrypting data transmitted over the WDS
links for a LAN-to-LAN bridge interface.

IEEE 802.1x/RADIUS.

IEEE 802.1x Port-Based Network Access Control and RADIUS

(Remote Authentication Dial-In User Service) settings for an AP interface.

Advanced.

Advanced settings of the DRBAP.

Packet Filters.

Ethernet Type Filters, IP Protocol Filters, and TCP/UDP Port Filters set-

tings.

Management.

UPnP, System Log, and SNMP settings.

3.1.2. Save, Save & Restart, and Cancel Commands

Fig. 19. Save, Save & Restart, and Cancel.

At the bottom of each page that contains settings you can configure, there are up to three but-
tons—

Save

Save & Restart

, and

Cancel

. Clicking

Save

stores the settings changes to the memory of

the DRBAP and brings you back to the start page. Clicking

Save & Restart

stores the settings

changes to the memory of the DRBAP and restarts the DRBAP immediately for the settings changes
to take effect. Clicking

Cancel

discards any settings changes and brings you back to the start page.

If you click

Save

, the start page will reflect the fact that the configuration settings have been changed

by showing two buttons—

Restart

and

Cancel

. In addition, changes are highlighted in

red

. Clicking

Cancel

discards all the changes. Clicking

Restart

restarts the DRBAP for the settings changes to take

effect.

Содержание WLB-230BXLE


















































Результаты поиска

Содержание WLB-230BXLE

Отзывы:

linkPro WLB-230BXLE, Руководство пользователя, Страница: 22 / 49

Результаты поиска

Содержание WLB-230BXLE

Отзывы: