linkPro WLB-230BXLE Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 49

linkPro WLB-230BXLE Скачать руководство пользователя страница 10

2. First-Time Installation and Configuration

2.1. Selecting a Power Supply Method

Optionally, the DRBAP can be powered by the supplied power adapter or POE (Power over Ethernet).
The DRBAP automatically selects the suitable one depending on your decision.

To power the DRBAP by the supplied power adapter:

1.

Plug the power adapter to an AC socket.

2.

Plug the connector of the power adapter to the power jack of the DRBAP.

NOTE:

This product is intended to be power-supplied by a Listed Power Unit, marked “Class 2” or

“LPS” and output rated “5V DC, 1 A minimum” or equivalent statement.

To power the DRBAP by POE:

1.

Plug one connector of an Ethernet cable to an available port of an active Ethernet switch that can
supply power over Ethernet.

2.

Plug the other connector of the Ethernet cable to the

LAN/Config

port of the DRBAP.

2.2. Mounting the DRBAP on a Wall

The DRBAP is wall-mountable.

1.

Stick the supplied sticker for wall-mounting.

2. Use

a

φ6

.5mm driller to drill a 25mm-deep hole at each of the cross marks.

3.

Plug in a supplied plastic conical anchor in each hole.

4. Screw a supplied screw in each plastic conical anchor for a proper depth so that the wireless

DRBAP can be hung on the screws.

5.

Hang the wireless DRBAP on the screws.

5

«
...
8
9
10
11
12
...
»

Содержание WLB-230BXLE


















































Отзывы:

Нет отзывов