Linkcom SlimDoorPhone 1 button, Руководство пользователя

Страница: 3 / 22

Linkcom France
11 rue du Soleil Levant 92140 CLAMART Copyright © 2012 – Linkcom – Tous droits réservés
3
1. Basic description
1.1 Features
Ø Very slim module for surface mounting only. Supplied in 1, 2 or 4 button variants.
Ø Voice communication powered from analogue telephone line only.
Ø Pulse and tone (DTMF) dial
Ø Two 16 digits numbers saved under each button (includes *, #, RECALL and pause)
Ø DAY/NIGHT mode
Ø Call prolongation by dialling * or #
Ø Electrical (magnetic) lock compatible
Ø Code to hang up from phone
Ø Code to open the door by phone
Ø 3 different passwords for code lock (external code from buttons)
Ø Optional number of rings before picking up incoming call
Ø Optional time between code entry button-presses
Ø Optional delay time before redialling
Ø Optional time before dialling starts
Ø Optional parameters for DTMF tones, Recall and Pause duration
Ø 3 default levels
Ø Programming by remote control (DTMF) and by direct PC connection via USB cable (available
separately)
Ø Integrated heating of printed circuit (PCB) (option)
Ø Permanent lighting through visiting cards (option)
Ø Earthing outlet for better protection against static electricity
Ø
Switchable audible confirmation tones
1.2 SlimDoorPhone models
Three versions are available :
1 button 2 buttons 4 buttons
2 Installation
This compact unit is fixed by 2 screws to the wall.
2.1 Opening, wiring, wall mounting and
settings
2.1.1 Name card panel
1. Every unit is supplied with a special key which is used to
release the name cards on the front panel. Push the key
into the hole in the speaker grille
(see figure - 1).
2. Push the name card panel down and then push it towards
to grille (see figure-2).
3. The panel will be released. Pull it towards you to remove
(see figure – 3).