Linkcom Link View NVR4, Руководство пользователя

Страница: 85 / 86

86
APPENDIX C: ERROR MESSAGE LIST
ERROR MESSAGE ERROR STATUS & REASON NOTE
DISK ACCESS ERROR! H.D.D. Data structure Un-normal.
Data does not record into NVR or bad sector on NVR H.D.D.
Please install another H.D.D. and perform the record again.
UPDATE FILE ERROR! Please re-download the update file and update again.
FIRMWARE UPGRADE
FAILED
Please reboot the NVR and upgrade the firmware. Please send the
NVR back to repair when NVR is disability.
MEDIA ACCESS FAIL! The USB file format is incorrect (Please format the pen drive to
FAT32) or Pen Drive is setup to ONLY READ mode (Please annul
ONLY READ mode) when reserve the data by using Pen Drive.
The data cannot be burn into CD/DVD disc. Please change another
CD/DVD disc and backup the file in CD/DVD disc storage.
NO FILE! There is no upgrade file within Pen Drive or the name of upgrade
file does not correspond with NVR format. Please adjust the
upgrade file name based on the following information.
16CH -> UpdateN16AF.bin
09CH -> UpdateN09AF.bin
04CH -> UpdateB.bin
USB DEVICE NOT
FOUND
NO USB
Pen Drive undetected. Please Unplug the Pen Drive and plug it
again.
BACKUP START TIME
ERROR
Backup start time error.
BACKUPEND TIME
ERROR
Backup end time error.
DISK ERROR The data cannot be burn into CD/DVD disc. Please change another
CD/DVD disc and backup the file.
FAN FAILED Fan Error Warning.
NO LOG DATA No Events Record.
SCHEDULE RECORD The condition is caused by trying to stop recording when perform
the schedule record. Please setup the record to manual mode and
then stop the record.
PLEASE SELECT ONE
CAMERA
The message will be shown while using the ZOOM function under
split screen condition. Please switch the screen into full screen
mode and then operate the ZOOM function.