Linkcom Link View NVR4, Руководство пользователя

Страница: 19 / 86

20
a. Normal Mode
Enable this channel. Key in the IP address, port, username, and password of
the device you prepare to connect. You can find the information on the IP
Cam.
Click the “connect IPCAM” button, the message will show in “State” column
to tell you whether connection succeeds or not.
Note: To the camera connected via ONVIF protocol, the PTZ control
function is not supported.
b. RSTP Mode
Under RTSP Mode, the NVR only support the IP address indication, the live
video, and video recording. Other functions like motion detection are not
supported.
Key in the IP address, port, username, and password of the device you
prepare to connect. You can find the information on the IP Cam.
To link to the IP camera, check the RTSP Path settings of your IP camera,
and key in the corresponding values of two streams in “RTSP Path 1” and
“RTSP Path 2”.