Linkcom Link View NVR4, Руководство пользователя

Страница: 30 / 86

31
This control item separates into two parts, “Buzzer Time” and “Relay Time”. User can
press ◄ or ► to switch the external buzzer time and video loss buzzer time in “Buzzer
Time” option. The adjustment value is from 5 to 99 seconds. Moreover, among “Relay
Time” option, the user can press ◄ or ► to switch the external buzzer time and video
loss buzzer time. The adjustment value is from 5 to 99 seconds as well.
The Value of Ext. Alarm Buzzer / Relay Time determine the buzzer / relay time of both
external alarm in and digital input (IPCam).
C. Alarm Event Setup
When the selected events are happened and triggered, the log will be recorded in the
event playback list, and you can use event search in playback to find them.
D. Alarm Action and Trigger Condition List
Action \ Type Motion detection External Alarm DI (IPCAM) Video Loss
Necessary Condition
(All the action below
can only be execute
when necessary
condition is met.)
Camera Setup >>Motion
Setup >>Tick "Area 1/2/3"
and set up the area
Alarm Setup >>Alarm
Trigger Setup >>"Ext.
Alarm Detection" set to
"Enable"
Alarm Setup
>>Alarm Trigger
Setup >>"Digital
Input (IPCam)" set to
"Enable"
Alarm Setup
>>Alarm Trigger
Setup >>"Video
Loss Detection" set
to "Enable"
Action \ Type Motion detection External Alarm DI (IPCAM) Video Loss
Switch to Single
Channel Screen / Split
Screen
Condition:
Alarm Setup >>Alarm
Trigger Setup >>"Alarm
Auto Switch" set to "Full
Screen(/Split Screen)"
X X X
Trigger Relay/ Buzzer
Condition:
Camera Setup >>Motion
Setup >>"Relay(/Buzzer)
Dwell" not set to "Off"
(It's enabled as long as Necessary Condition is meet)
*p: Trigger length setting: Alarm Setup >>Alarm Output Setup
>>Relay(/Buzzer) Time
*p
：
"Ext. Alarm Relay(/Buzzer) Time" length setting determines the
trigger lenth of both "External Alarm" and "DI(IPCAM)"