Linkcom Link View NVR4, Руководство пользователя

Страница: 77 / 86

78
or DI from IPCam is triggered. Tick “Motion” to send video to the mail address
when motion detection is triggered.
SMTP Port: The port of SMTP (known as Simple Mail Transfer Protocol). (Default
value is 25)
Username: The username while log in to the mail server.
Password: The password while log in to the mail server.
Sender’s Mail: The sender’s account when send the mail via this mail server.
Receiver’s Mail: The receiver’s mail address.
Bcc Mail: The receiver’s mail address for Bcc Mail.
Event Subject: The subject of this mail. (Default value is ALARM MAIL)
FTP Server: Tick “Alarm” to upload video to FTP when ex ternal alarm or DI from
IPCam is triggered. Tick “Motion” to upload video to FTP when motion detection is
triggered.
Username: The username while log in to the ftp server.
Password: The password while log in to the ftp server.
Port: The port number of file transmission. (Default value is 21)
Path: The ftp path where the user wants to reserve the information.
Finally, click on Apply button to reserve the setting.
H. NETWORK /DHCP Server Setup
Give the IP address to set up the DHCP Server. The IP will change between the Start
IP and the End IP.
I. HTTP Notification
Use the checkbox to enable or disable HTTP Notification. This function allows users
to set up the CGI command to a HTTP server. The server can be any device that can
receive CGI via HTTP protocol. When alarm events happen, NVR sends CGI to that
server.