Linkcom France
11 rue du Soleil Levant 92140 CLAMART Copyright © 2011 – Linkcom – All rights reserved
3
1. Basic features:
The
Link GSM DoorPhone
is useful for different installation. You just insert a SIM card and connect the
power supply, eventually connect the lock. The
Link GSM DoorPhone
use the GSM network, so you do
not need any phone line or other cables.
•
On the button, you can configure up to 7 phone numbers that will be progressively dialed after
button press.
•
Automatic regulation of microphone volume.
•
2 independent relays, remotely controlled switching relays with different ways: Activation by ringing,
code during call, button press, etc...
•
Recording of numbers from which you activated the relay by ringing.
•
1 input to connection for example an alarm (alerting by SMS) or for controls the gate opening (beeps
during call).
•
Voice messages signaling of different events (“wait please”, “Open“, etc…)
1.1 Function:
Hands free GSM phone
with preprogrammed phone numbers for 1 with name cards:
1.
Outgoing call :
After the button is pressed, the Link GSM DoorPhone dials the first number
saved on the list of numbers. The numbers are saved on the names “
ABUTTON1
” to
“
ABUTTON7
”. When the called party is busy or not available, the Link GSM DoorPhone calls
automatically the second number “
ABUTTON2
” etc… When the called party picks up the call, the
connection is established and the next numbers are not dialed.
2.
Incoming call :
According to the setting, the Link GSM DoorPhone can accepts all the calls or
only the calls whose the numbers are recorded on the SIM card.
The GSM DoorPhone can also reject the incoming calls. Before picks up the call, the GSM
DoorPhone can alert by preprogrammed melody.
2 remotely controlled switching relay
. Each relay can be controlled up settings by different ways:
1.
By ringing
– The authorized number must be registered on the SIM card. If authorized number
calls the GSM DoorPhone, the call is rejects and the relay is activated. The list of numbers used
this activation with the time is sent to the preprogrammed number.
2.
By code
– During voice communication (incoming or outgoing call), the called party press 2 digit
code by DTMF for relay activation. For each relay you can set different code.
3.
By SMS
– you can remotely switch ON/OFF the selected relay or activate relay for programmed
time by SMS. The authorized number must be registered on the SIM card.
4.
Camera mode
– The selected relay is ON when the GSM DoorPhone picking up the call and it is
OFF by hang up up the call.
5.
Lighting mode
– The selected relay is ON by picking up the call and it stays ON for
preprogrammed time after hang up.
6.
Button mode
– The selected relay is ON after button press and stays ON for preprogrammed
time.
1 adjustable input
:
1.
SMS
sending
“ALARM ON” to preprogrammed number when input is short circuit against ground.
SMS “ALARM OFF” to next preprogrammed number when input is disconnected.
2.
Opening detection
. When input is activated during call (for example by door opening), the GSM
DoorPhone generates into a call 3 short beeps for time of input activation.
