Introduction:
Congratulations on purchasing the LinkTDS PJ7 dispatch headset interface. This powerful
interface will provide quality audio, ease of operations and support for multiple PTT interface
formats. The technology is designed for a rugged environment yet carefully designed to fulfill
any dispatch environments audio needs.
Installation:
The LinkTDS PJ7 (PJ7) interface plugs into any computer that supports a USB sound interface
via the systems USB port. To operate the PJ7 simply plug into the computers USB port and the
unit is ready to operate.
Note:
A front panel USB port is brought out to replace the port used for the PJ7 and can be used for
any USB device such as a thumb drive, USB mic/headset or USB based peripheral.
When plugged in the computer will recognize several devices that are located inside the PJ7.
1.
USB Soundcard interface
a.
This device provides the PJ7's audio support for the earphone and microphone
2.
FT232 Serial Port
a.
This device provides the computer an ability to customize the PJ7's settings for
each setting. The settings are volatile therefore they will need to be set-up by your
software each time. When ordering additional PJ7's Link will happily set-up
defaults for your PJ7's. When power is then applied, your settings will be recalled
requiring no customization from your software.
b.
The volatile nature of the settings was designed to associate each user with their
own mic/volume settings. Therefore when a user logs on to the CAD software the
software can tell the PJ7 what settings are associated with the operator.
3.
USB Hub
a.
This device is needed to convert your 1 USB port into several USB Ports
4.
Macroworks Interface
a.
This device provides the HID support for custom Push To Talk support in your
dispatch software. You will need to assign the necessary keyboard keystrokes to
simulate a PTT on and a PTT off. You will need to run a configuration software
on a Windows(TM) computer to configure the keystrokes and to FLASH them
into the PJ7's non-volatile memory.
These interfaces enable the PJ7 to be configured and to operate. Special drivers may be needed
and are included on the enclosed disk.
Содержание PJ7rmn5068a
Страница 12: ...Appendix Schematic Diagrams...
