2
CAUTION
1.
INTRODUCTION
Thank you for choosing a Link Cargo Management Products LB20 Ramp. We want to help you to get the best
results from the ramp and to operate it safely. This manual contains information to assist you with its installation.
The manual is intended solely for use with this product.
All information in this manual is based on the latest information available at the time of printing. Link
Manufacturing reserves the right to change its products or manuals at any time without notice. Contact Link CMP
at (800) 248
-
3057 for information on recent changes to products.
Damaged components should be returned to Link with a pre
-
arranged Returned Goods Authorization (RGA)
number through the Customer Service Department. The damaged component may then be replaced if in
compliance with warranty conditions.
2.
SAFE WORKING PRACTICES:
3.
INSTALLATION GUIDELINES
4.1.
In order for this LB20 Ramp to operate properly, it must operate in the parameters specified by Link.
4.2.
The installer must verify the Ramp is configured properly.
4.3.
No alteration of any Link Ramp components are permitted without proper authorization from qualified
Link personnel.
IMPORTANT:
IT IS IMPORTANT THAT THE ENTIRE INSTALLATION INSTRUCTIONS BE READ
THOROUGHLY BEFORE PROCEEDING WITH RAMP INSTALLATION.
•
Wear appropriate gloves, eyeglasses, ear protection, and other safety equipment when handling parts.
•
Practice safe lifting procedures. Consider size, shape, and weight of assemblies. Obtain help or the assis-
tance of a crane when lifting heavy assemblies. Make certain the path of travel is clear.
WARNING
•
Proper tightening of fasteners is important to the performance and safety of this product.
•
Make certain the vehicle is in placed in park on a flat surface, and the parking brake is engaged.
WARNING
•
To insure safe operation, ramp shall not be operated without installation of pinch point guards and handles.
•
See FIG 7 & 8 for proper installation procedure.
