Link LB20 Series, Руководство по установке

Страница: 4 / 9

4
1/2” X 1 3/4”
HEX BOLTS
1/2”
HEX NUTS
1/2” X 1 3/4”
HEX BOLTS
LIFT ASSIST ASSEMBLY
1. Attach the Latch Mount Plate to the Rear Mount Plate using eight 1/4” X 1/2” Hex bolts, and four 1/4” hex
nuts rear hole.
(See FIG. 4)
2. Attach the Ramp to the Rear mount plate by sliding the two Hinge Pins towards the center of the Ramp
aligning them to the mount plate and releasing.
3. Attach the two Tie Rods to the Latch Mount Plate and Torque Arms using the four 1/2” X 1 3/4” hex bolts
FIG. 4
FIG. 5
1/4” HEX NUTS
1/4” X 1/2”
HEX BOLTS
1/4” X 1/2” HEX
BOLTS
1/4” X 3/4”
HEX BOLTS
1/4” X 3/4”
HEX BOLTS