3
9. INSTALLING MULTIPLE TRANSMITTERS
10. TESTING TRANSMITTERS
11. ERASING TRANSMITTERS
12. RECORDING REMINDER MESSAGES
ADDS MULTIPLE TRANSMITTERS
PRESS TEST BUTTON
• CONSOLE ANNOUNCES
TEST MODE
3
2
ACTIVATE TRANSMITTER
• CONSOLE ANNOUNCES
THE TRANSMITTER TYPE
REPEAT STEPS 2 & 3 FOR
ADDITIONAL TRANSMITTERS
(UP TO 16 TOTAL)
1
PRESS TEST BUTTON AGAIN
• CONSOLE ANNOUNCES ITS
READY TO LEARN TRANSMITTERS
4
NOTE: IF THE CONSOLE'S MEMORY
IS FULL, THE CONSOLE WILL ANNOUNCE
"ERROR ZONES FULL"
PRESS CANCEL TO RETURN TO STANDBY MODE
• THE CONSOLE WILL ANNOUNCE ITS STATUS
THE CONSOLE WILL RETURN TO STANDBY MODE
AUTOMATICALLY AFTER 3 MINUTES
5
DXS-62
DXS-63
NOTE: EACH TIME THE TEST BUTTON IS PRESSED IN THE ADD
TRANSMITTER MODE, THE CONSOLE WILL BE READY TO INSTALL A
TRANSMITTER IN THE NEXT AVAILABLE SENSOR ZONE LOCATION.
THE CONSOLE WILL ANNOUNCE THE SENSOR ZONE LOCATION NUMBER.
3
2
1
PRESS TEST BUTTON
• CONSOLE ANNOUNCES
TEST MODE
ACTIVATE EACH OF THE
CONSOLE'S TRANSMITTERS,
ONE AT A TIME
THE CONSOLE WILL ANNOUNCE
THE TRANSMITTER'S TYPE
AND ZONE NUMBER AND ANY
SUPERVISORY CONDITIONS
FOR THE TRANSMITTER
PRESS CANCEL TO RETURN TO STANDBY MODE
• THE CONSOLE WILL ANNOUNCE ITS STATUS
THE CONSOLE WILL RETURN TO STANDBY MODE
AUTOMATICALLY AFTER 3 MINUTES
4
PRESS AND HOLD THE TEST BUTTON FOR 5 SECONDS
• CONSOLE ANNOUNCES "ZONE RESET"
(ALL TRANSMITTERS ERASED)
1
CAUTION: ALL TRANSMITTERS
WILL BE ERASED!
PRESS CANCEL TO RETURN TO STANDBY MODE
• THE CONSOLE WILL ANNOUNCE ITS STATUS
THE CONSOLE WILL RETURN TO STANDBY MODE
AUTOMATICALLY AFTER 3 MINUTES
2
RECORDING REMINDER MESSAGES
1. PRESS AND RELEASE THE TEST BUTTON
TO ENTER TEST MODE
2. PRESS AND HOLD THE HOME BUTTON FOR
5 SECONDS (BE READY TO RECORD)
3. RECORD UP TO A 15 SECOND MESSAGE
(SPEAK AT NORMAL VOLUME, TWO FEET FROM CONSOLE)
4. PRESS THE HOME BUTTON TO STOP RECORDING
5. PRESS THE HOME BUTTON AGAIN TO PLAY THE
MESSAGE JUST RECORDED, PRESS THE HOME
BUTTON TWICE AND HOLD IT AFTER THE 2ND PRESS
TO RECORD ANOTHER MESSAGE IN THE NEXT
AVAILABLE MESSAGE NUMBER
6. REPEAT STEPS 2-5 FOR ADDITIONAL MESSAGES
(UP TO 8 MESSAGES ALLOWED)
7. PRESS AND RELEASE THE CANCEL BUTTON TO
EXIT TEST MODE
TEST PLAYING REMINDER MESSAGES
ERASING ALL REMINDER MESSAGES
1. PRESS AND RELEASE THE TEST BUTTON
TO ENTER TEST MODE
2. PRESS AND RELEASE THE HOME BUTTON
3. THE CONSOLE WILL ANNOUNCE EACH MESSAGE
NUMBER, THEN PLAY THE RECORDED MESSAGE
4. PRESS THE HOME BUTTON TO ADVANCE TO
THE NEXT MESSAGE TO BE PLAYED
5. PRESS AND RELEASE THE CANCEL BUTTON TO
EXIT TEST MODE
1. PRESS AND RELEASE THE TEST BUTTON
TO ENTER TEST MODE
2. PRESS AND HOLD THE HOME BUTTON FOR
MORE THAN 10 SECONDS
3. THE CONSOLE WILL ERASE
ALL
REMINDER MESSAGES
AND PLAYBACK SCHEDULES
4. PRESS AND RELEASE THE CANCEL BUTTON TO
EXIT TEST MODE
NOTE: TIME SCHEDULING FOR PLAYING REMINDER
MESSAGES IS SET WITH THE RA-2400 SOFTWARE
222626 A
IMAGE 5
