DO7090S
Steamgenerator
7. Iron rest
8. Base
9. Water tank
10. Anti-cal cartridge
Display
1. water indicator
2. On/off switch
3. Steam on/off switch
4-5-6. Water hardness indicator
7. Anti-cal cartridge indicator
8. Button opening water tank
9. Min. steam button
10. Med. steam button
11. Max. steam button
12. Button adj. Water hardness
HINT FOR IRONING
Sort out the articles to be ironed according to the type of fabric. This will minimize the
frequency of temperature adjustment for different garment.
Test ironing a small area on the backside or inside of the garment if you are unsure
about the type of fabric. Start with a low temperature and increase gradually.
Wait for 2 minutes before ironing heat sensitive fabrics. Temperature adjustment needs
certain time to reach the required level no matter if it is higher or lower.
Delicate fabrics such as silk, wool, velour, etc. are best ironed with an ironing cloth to
prevent shine marks.
OPERATING INFORMATION
The appliance has a high technology low-pressure steam chamber that can be heated
up in short time. Water is converted to steam vapor in the chamber and transported to
the iron unit through the supply cord.
HOW TO FILL WATER
Slide out the water tank.
Fill the tank to the max level.
Replace the water tank in place.
Refi lling can be done whilst the appliance is in operation. It is unnecessary to wait for
the appliance to cool down.
Due to the life cycle of anti-calcium resins and the water hardness, we suggest to
replace the anti-cal cartridge when the indicator goes blinking.
If new cartridge is unavailable you may use distilled water and continue operating the
24
