Linea 2000 Domo DO326IP, Инструкция пользователя

Страница: 25 / 52

25
DO326IP
www.domo-elektro.be
EN
TURNING OFF
· Press the on/off button to turn the hob off. The fan will continue to operate to cool the appliance.
· Caution: do not touch the cooking zone if the screen displays ‘H’, which means that
the hob is still hot.
CLEANING AND MAINTENANCE
· Pull the power plug prior to cleaning the device. Do not use any caustic cleaning agents and make sure
that no water penetrates the device.
· To protect yourself from electric shock, never immerse the device, its cables and the plug in water or
other liquids.
· Wipe off the ceramic field with a damp cloth or use a mild, non-abrasive soap solution.
· Wipe off the casing and the operating panel with a soft cloth or a mild detergent.
· Do not use any petrol products to not damage the plastic parts and the casing/operating panel.
· Do not use any flammable, acidy or alkaline materials or substances near the device, as this may
reduce the service life of the device and lead to deflagration when the device is turned on.
· Make sure that the bottom of the cookware does not scrape across the surface of the ceramic field,
although a scratched surface does not impair the use of the device.
· Make sure that the device was properly cleaned before storing it in a dry place.
· Make sure that the control panel is always clean and dry. Do not leave any objects lying on the hob.
PROBLEM EN SOLUTIONS
PROBLEM POSSIBLE CAUSES
The display does not light up after
connecting the appliance. · Has the appliance been connected correctly?
· Is the button or plug damaged?
The on/off button has been turned
on and the light turned on but it does
not heat. · Is the temperature too high?
· Is the environment too hot?
· Are the ventilation openings blocked?
· For other causes, contact the repair service.
Heating stops suddenly during the
process. · Are you using the correct pan?
· Is the timer done?
· The appliance has gone into safe mode. Wait a few
minutes and reconnect the appliance before trying
it again.
The control panel is not responding. · Is the child lock on? Unlock it.
The control panel is difficult to
operate. · Is the control panel clean?
· Check that there is no dirty water on the control
panel.
Pots and pans or the cooker itself
make a noise while you’re cooking. · This is normal, and not a fault.
The pot or pan does not heat up
during cooking. · The induction cooker does not recognise that pot
of pan. Are you using the correct pot? See ‘Before
using the first time’.