Linea 2000 Domo DO326IP, Инструкция пользователя

Страница: 23 / 52

23
DO326IP
www.domo-elektro.be
EN
· Do not place any magnetically objects like credit cards, cassettes etc. on the glass surface while the
device is in operation.
· On order to avoid overheating, do not place any aluminium foil or metal plates on the device.
· Do not insert any objects like wires or tools into the ventilation slots. Attention: this may cause electric
shocks.
· Do not touch the hot surface of the ceramic field. Please note: the induction hotplate does not heat up
itself during cooking, but the temperature of the cookware heats up the hotplate!
· Do not heat up any unopened tins on the induction hotplate. A heated tin could explode; therefore
remove the lid under all circumstances beforehand.
· Scientific tests have proven that induction hotplates do not pose a risk. However, persons with a
pacemaker should keep a minimum distance of 60 cm to the device while it is in operation.
· The control panel reacts to touch, not requiring any pressure at all.
· Each time a touch is registered, you hear a signal or beep.
PARTS
1. Ceramic hob
2. Cooking zones (2 x 1500/2000W)
3. Control Panel
4. On/Off button
5. Boost mode
6. Temperature setting: setting 1 to 8
7. Timer: 3 hours
8. Childproof lock
USE
· When operating the device, please put on a pan/pot firstly. Note: Always place the pot or pan in the
centre of the hotplate.
· Use pots and pans that are suited for induction hobs. This can be tested easily.
The bottom of your pots and pans must be magnetic. Take a magnet and place it
on the bottom of your pot or pan, if it sticks the bottom is magnetic and the pot
is suited for ceramic cooking plates.
· The control panel is equipped with touch-screen operation. You do not need to press any buttons -
the appliance will respond to touch. Make sure that the control panel is always clean. Each time it is
touched, the appliance will respond with a signal.
1
2
3
3
5 4
6
7
8