Line Magnetic LM-150IA, Руководство по эксплуатации

Страница: 8 / 17

1
2
3
4
5
6
7
8
9
Operation:Indicate the state of the amplifier. Orange means operation and if turning on it will twinkle for 30 seconds
during the time delay.
Power: ON/OFF. Turn on or turn off the amplifier.
Ampere meter: Monitor the power output or current of power tubes.
IR remote sensor: React according to the orders of the remote. It is essential that there are no obstacles between
the remote control and the sensor.
Meter/Bias Current: Switch between power output and current of power tubes.
Integrated/PRE IN: Switch between Integrated and PRE IN mode. If PRE IN is selected the amplifier will work as a
Power Amplifier.
Selector: Source selection among LINE 1, LINE 2 and LINE 3 inputs.
Volume knob: This volume knob adjusts the output volume of the amplifier sent to the loudspeaker. Volume up to
the right while volume down to the left.
Mute: If it is muted, the indicator will twinkle. Mute from remote control.
Front panel
Functions descriptions
5 6 7 8 4 3 2 1 9
Input voltage level of the amplifier is 240VAC ±5% and please, make sure that your local voltage is the same as indicated
on the rear panel. A too low or too high voltage can cause serious damage to your amplifier. In case you find an improper
voltage, please contact our company responsible for the power supply or your local dealer.
7