Line Magnetic LM-150IA, Руководство по эксплуатации

Страница: 13 / 17

Turning on
IMPORTANT - BEFORE TURNING ON THE AMPLIFIER
WARNING :
Please make sure corresponding voltage is the same as required. We are not responsible for damage
caused by misuse of unsuitable voltage.
General observations
Make sure all connections (first, connect the speaker cables, then the cables from your sources, and plug the power
cable into the AC outlet) are valid, and the stability of your power supply AC 240V - 50Hz.
Please make sure corresponding voltage is the same as required. We are not responsible for damage caused by misuse
of unsuitable voltage.
Startup procedure
1-
2-
3-
4-
5-
Set the VOLUME of the amplifier to zero (potentiometer totally on the left).
Switch the amplifier to ON position via the POWER switch located on the side of the amplifier.
The LED lights up in orange on the front panel of the amplifier. It indicates that the amplifier is working.
After 30 seconds, the orange led blinking will stabilize to indicate that the amplifier is ready for use.
Select the source you want to listen to with the SELECTOR button located to the right of the front panel.
Adjust the VOLUME knob as you like to enjoy your music.
-
-
-
-
-
-
It is normal that power transformer becomes hot for extended period of operation.
Unplug the product during lightning storms or when not in use for a long time.
To prevent damage to the amplifier never disconnect the speaker cables while the unit is ON.
In order to protect the tubes please re-switch on the amplifier after turned off in two minutes.
This product is designed and manufactured with our original parts for reaching the best results. We are not responsible
for problems and damages caused to the amplifier by non-original replacement parts.
Line Magnetic Audio reserves the right to change specifications at any time without further notice in advance if
products are upgraded. Specifications on the manual only show the specifications of the amplifier you’ve bought.
12