Line Magnetic LM-150IA, Руководство по эксплуатации

Страница: 4 / 17

1x LM-150IA
2x Fuses
1x Detachable power cord
1x Remote control
1x This user manual
WARNING
Make sure that the device is not plugged into the mains before making any connections. It is also recommended to turn
off or disconnect all other devices associated while making connections to the product.
Keep all packing materials for future use and please fill in the warranty card for registration of warranty.
Please make sure that your local voltage is the same as indicated on the rearpanel. A too low or too high voltage can
cause serious damage to your amplifier. In case you find an improper voltage, please contact our company or your local
dealer.
Product features
Package contents
-
-
-
-
-
-
-
-
-
-
-
-
-
-
One hundred watts per channel, Class AB Integrated Stereo Amplifier with KT150 output power tubes, 12AX7, 12AU7
and 6SN7 input tubes. 12AX7, 12AU7 and 6SN7 are for three stages of signal amplification while KT150 are for the
power amplification.
Well selected and matched tubes. Tubes are Shuguang 12AX7, Shuguang 12AU7, Electro Harmonix 6SN7 and
Tungsol KT150. No matter it is the Pre-stage or power stage of tubes we select and choose the best matching ones to
use on the same unit of amplifier to get the best sound quality out of it.
Power tubes of KT150 can be replaced by KT120 so that you can enjoy a different sound.
Three pairs of Line inputs, One Pre-In and speaker terminals for 4, 8, 16 ohm speakers are located on the back panel.
Different from other inputs Pre-In offers you a possibility to connect to some other Preamplifier so that you can regard
the LM-150IA as a power amplifier.
RCA terminals are specially designed by Line Magnetic for the amplifier. It can reduce the signal loss during transition
and guarantee the sound quality.
User bias control has been used for bias adjustment and two meters have been added to the front plate to allow you
to monitor bias with ease. Bias meter here on LM-150IA is not just a meter for monitoring the bias but also a powe r level
meter when switched to Meter by the selector on the front. It moves when music is on. Two separate meters for the
Left and Right Channel have been build for monitoring.
Specially designed EI transformers made of Z11 Core for power supply and two Japanese Audio grade EI types of
output transformers with wide bandwidth are applied. All transformers and chokes are encapsulated and installed
separately on the amplifier to avoid and lower the disturbance between each other.
Japanese ALPS volume potentiometer, American MIT and German Mcap coupling Capacitors etc. Audio grade of
components have been applied.
Hand made construction with the finest point-to-point wiring.
Soft Start and time-delay circuit. (30 seconds).
Solid Aluminum design of the front with Piano lacquer painting of chassis.
Metal and removable tube guard cage.
Infrared Remote control.
3