English Manual
INSTALLATION
Before you start please switch off all devices to be attached.
Apart from the PCs to be connected you only need one keyboard,
monitor and PS/2 mouse and the standard connection cables (male to
male) to connect the keyboard, monitor and mouse ports of your PCs
to the LINDY CPU Switch LITE. If some cables are not long enough we
recommend that the complete cable is replaced with a longer length
rather than using extension cables. Extension cables introduce
additional plug to socket connections, which always lowers the signal
quality. When using high resolution or long distances this should be
noted.
Connect the keyboard, monitor and mouse directly to sockets of the
LINDY CPU Switch LITE named CONSOLE. If your keyboard has a 5
pin DIN connector you can use a PS/2 adaptor (LINDY Art.No. 70129).
Serial Mice with 9 Way D connectors are not supported and cannot be
used, even with an adapter.
Connect the PCs keyboard, monitor and mouse ports directly to the
appropriate sockets on the LINDY CPU Switch LITE named CPU A, B,
C or D. The mouse port on your PC has to be PS/2 type (6 pin Mini
DIN socket).
When you have made all connections switch on the monitor first and
then the PCs.
