English Manual
English 8
Configuration – IP Address
All changes made here require a restart of the firmware to get valid.
Hostname
Enter the host name of
LINDY IPower Control. LINDY
IPower Control
uses this name to connect with a
DHCP server.
Special characters may result inwork malfunction.
IP Address
Here the IP address of LINDY IPower Control can be
changed.
Netmask
The subnet mask of the
LINDY IPower Control
may be changed here
.
Gateway
Here, the standard gateway of
LINDY IPower Control
can be set.
Use DHCP
Adjusts, whether
LINDY IPower Control
gets its TCP/ IP settings directly from your DHCP
server. If DHCP is activated,
LINDY IPower Control
proves, whether a DHCP server is active
within your LAN.
Then LINDY IPower Control
requests TCP/IP settings from this server. If
there is no DHCP server present inwork, we recommend to deactivate this option.
Configuration - IP ACL
Reply ICMP-Ping requests
Sets whether or not, the
LINDY IPower Control
shall
react on ping requests.
Enable IP Filter
The IP Access Control List (IP ACL) of
LINDY IPower
Control
can be activated here.
If IP ACL is active, DHCP and SNMP only work, if all
relevant servers and clients are registered in this list.
IPower Control 4