English Manual
English 3
Security Advise
The device must be installed only by qualified personnel according to the following installation
and operating instructions. The manufacturer does not accept responsibility in case of improper
use of the device and particularly any use of equipment that may cause personal injury or
material damage. The device contains no user-maintenable parts. All maintenance has to be
performed by factorytrained service personnel. Check if the power cord, the plug and the socket
are in proper condition. The device can be connected only to 230V AC (50 or 60 Hz) or 12/24V
DC power supply sockets. Always connect the device to properly grounded power sockets. The
device is intended for indoor use only. Do NOT install them in an area where excessive
moisture or heat is present. Because of safety and approval issues it is not allowed to modify
the device without our permission. Please note the safety advises and manuals of connected
devices, too. The device is NOT a toy. It has to be used or stored out or range of children.
Packaging material is NOT a toy. Plastics has to be stored out of range of children. Please
recycle the packaging materials. In case of further questions, about installation, operation or
usage of the device, which are not clear after reading the manual, please do not hesitate to ask
our support team.
Description
With
LINDY IPower Control 4x DIN
electrical devices can be switched via a TCP/IPwork.
There are only two steps necessary for installation: The connection to an electric circuit and a
TCP/IPwork and the configuration of the IP settings. Afterwards
LINDY IPower Control 4x DIN
can be controlled by all PCs of thework.