Lindsay Transportation Solutions Sales and Services, Inc
(888) 800-3691 [U.S. toll free] or +1 (707) 374-6800
Lindsay Transportation Solutions Sales and Services, Inc
(888) 800-3691 [U.S. toll free] or +1 (707) 374-6800
32
Page 32
U n i v e r s a l T A U - I I
®
C r a s h C u s h i o n
T A P E R E D S Y S T E M
Flush Mount Backstop
The Flush Mount Backstop system (Figure 17) is
intended for applications where the hazard width
exceeds the limitations of the PCB Backstop and are
applicable in locations with limited foundation size.
The Flush Mount Backstop can be attached to
reinforced safety shape or vertical concrete structures
up to 36” [910mm]. Systems over 24” [610mm] wide
require the 36” [910mm] adapter. Edges of vertical
concrete may require chamfer according to local
standards.
The Cable Tensioning is moved to the front of the
system so the rear cable anchors do not protrude
outside of the rear extension panels.
The backstop is attached to the foundation and to the
concrete backstop. Install anchors in accordance
with BSI specifications. Vertical slots on the backstop
allow removal replacement of the backstop. Anchors
must be placed at the top of said slots to be effective.
Flush Mount Backstop systems use the same cable
used in all parallel systems. The cable is installed
with the threaded tensioning end forward. The
looped end is pinned in place at the backstop. The
Front Cable Anchor uses an inserted key to keep the
threaded stud from rotating during tensioning.
For additional information or questions about the
Universal TAU-II Crash Cushion, please call the
BSI Customer Service Department at (888) 800-
3691 (U.S. toll free) or (707) 374-6800.
Figure 17 Flush Mount Backstop
Part #B041102
(30” Backstop Spacer)
