Lindsay Transportation Solutions Sales and Services, Inc
(888) 800-3691 [U.S. toll free] or +1 (707) 374-6800
17
Page 17
U n i v e r s a l T A U - I I
®
C r a s h C u s h i o n
P A R A L L E L S Y S T E M
Repeat this step until all Sliding Panels have been
mounted to the Diaphragms. The forward-most
Sliding Panel must always be on the outside of the
system (next to the mushroom head of the sliding
bolt).
The photo above shows what the system will look like
after the End Panel and all of the Sliding Panels have
been installed on the right side as well as the End
Panel and rear-most Sliding Panel on the left side.
Continue attaching the Sliding Panels along the left
side of the system until all of the Sliding Panels are
installed.
NOTE: For the system to telescope properly, the
forward most slotted Sliding Panel MUST be on
the outside.
The photo above shows what the system will look like
after both of the End Panels and all of the Sliding
Panels have been installed.
The final bay will be assembled separately from the
rest of the system and then installed as a complete
unit. The components that make up the final bay are
two Sliding Panels, the Front Diaphragm, the Nose
Cover and the Leg Supports.
Hand tighten the nuts of the Slider Bolts
Downstream
Sliding Panel
Sliding Bolt
Upstream
Sliding Panel
Right side Sliding Panels installed – Left side End Panel and last Sliding
Panel installed.
All End Panels and Sliding Panels installed
Nose Bay components
Sliding Panel
Sliding Panel
Nose Cover
Support Legs
Front Diaphragm
