LINDR KCH 01584, Инструкция по эксплуатации

Страница: 26 / 36

26
19. Built-in Air Compressor
The air mini-compressor is built into the cooling device itself. The compressor can
be turned off separately with a switch. Air pressure is controlled automatically in 2.8
– 3.4 bar range. The air outlet from the cooler terminates in a 5/16“ (8 mm) rapid
coupling marked AIR. The air compressor is zero-maintenance, fitted with a
molecule filter for the drawn-in air.
20. How to Work with speed fittings.
Rapid Coupling Installation
Grasp the rapid coupling and insert the hose all the way
inside the rapid coupling body (ca. 20 mm). The end of
the hose must be straight, so that it plugs fully into the
coupling. If the hose will not go in, moisten the end of the
hose.
Speed fitting Removal
Hold the grey ring tight against the body of the rapid
coupling and pull out the hose.
WARNING : If you do not hold
the grey ring but pull at the hose, the
rapid coupling will cut even deeper
into the hose.
WARNING : Hoses must not be pressurised during removal.