17
Lindab reserves the right to make changes without prior notice
2021-11-02
Lindab reserves the right to make changes without prior notice
2021-11-02
UltraLink
®
Monitor
FTMU
lindab | technical information
Address :
Modbus register address (3x indicates Input & 4x indicates Holding)
UltraLink
®
:
Type of UltraLink
®
where the register is available (Indicated by “x”)
Name:
Name of register
Description:
Short description of register.
Data type:
Data type for register (16bit contained in one register, 32bit and float in two consecutive registers) .
Unit:
Unit for register value (if any).
Div:
Scale factor for stored value (divide register value with “div” to get correct value).
Default:
Default setting.
Min:
Minimum value allowed for the register.
Max:
Maximum value allowed for the register.
Access:
RO for read only (Input registers) and RW for read and write (Holding registers).
* = the value depends on the dimension of the product.
Appendix A – Modbus register
Addr
ess
UltraLink
®
Name
Description
Data type
Unit
Div
Default
Min
Max
Access
FTCU
FTMU
INPUT REGISTERS
3x008
X
X
Product Nominal Size
Nominal diameter of duct
16bit
mm
RO
3x013
X
X
Unit Status
Current unit status:
0 = Normal mode;
1 = Locating flow;
2 = Override control;
3 = Error;
4 = Control loop regulating;
5 = Angle sensor calibrating
16bit
RO
Flow info
3x150
X
X
Velocity in m/s
Velocity in m/s
Float
m/s
RO
3x152
X
X
Air flow in m³/h
Air flow in m³/h
Float
m³/h
RO
3x154
X
X
Air flow in l/s
Air flow in l/s
Float
l/s
RO
Temperature info
3x200
X
X
Current temperature in ºC
Temperature in degree celcius.
16bit
ºC
10
RO
Alarms
3x400
X
X
Alarm Register 1
Alarms 1-32 - bitwise:
1 = Motor not working.
2 = Angle sensor not working correctly.
3 = Flow setpoint not reached.
4 = Flow measure problems.
5 = External sensor low battery.
6 = External sensor not responding.
7 - 31 = Reserved for future use.
32 = Factory data is corrupted.
32bit
RO
Other
3×500
X
X
Signal amplification
Current signal amplification
16bit
0
3
20
RO
