Then press “Confirm”
.
“
HOLIDAY
” mode speed is the minimum.
Once “
HOLIDAY
” mode is enabled, control device asks
for the period duration in days.
In case where duration is unknown, the user can enter
nothing in the field of duration.
This way permanent “
HOLIDAY
” Mode is enabled.
In any case, “
HOLIDAY
” mode can be stopped by
changing mode within User Menu.
PLEASE NOTE:
the operating parameters of “
HOLIDAY
”
mode can be changed by the installer (Parameters Menu
section).
DAY
°C
P
AUTO
+
-
Press “M”
; scroll with the
TOUCH PAD
until
the function “
P
” starts flashing and confirm by pressing
“Confirm”
.
When confirmed, the preset program is activated.
The display shows the chosen program number when the
unit is “put into service”.
P
P
AUTO
DAY
°C
If this icon is present, it means that
a scheduled program is active.
The number identifies the growth
program chosen when
commissioning the unit.
The activation of the weekly programme does not
preclude the user's ability to manually change the speed of
the fans.
In fact, despite a programme in time slots is active, the user
can still operate on the TOUCH PAD, increasing or
decreasing the speed as desired.
The manual override applied to the weekly programme will
remain operational until the next time slot, when
automatic programming will become active again.
Lindab reserves the right to make changes without prior notice
202
2
-0
1
-
28
RHR-CF
lindab | we simplify construction
Installation instructions
16.
8
Holiday mode
Press “M” and scroll with the
TOUCH PAD
until the
“
HOLIDAY
”
mode starts flashing.
Fig. 65
16.
9
Activation of weekly programme
Fig. 66
40
